HenryHill
Apr 25, 12:36 AM
If i Type in the name of a .pdf that is in a folder on my desktop. It does not come up on in quicksilver. Any way for me to get EVERY file into this? I don't get why it shouldnt bring it up if i type in the exact name of the file..
3d glasses, java chess, 3d
Pirates of the Caribbean 3D
3D Glasses with ABS Plastic
the 3D content online,
glasses free 3d tv
MacBandit
Oct 4, 08:52 PM
I order books, music used and new, software, and telescope parts from them and I have never had a problem. They have always been very cheap and prompt.
twcbc
May 6, 08:55 AM
Would be nice to see Street View added to Maps. But I know it won't happen. :D
iirc, Street View had been in Maps since iOS3.
iirc, Street View had been in Maps since iOS3.
Wild-Bill
Feb 27, 11:18 AM
Hey all,
Ok, so I have been using the MOTU Ultralite for a number of years now. I end up working on my music off and on, so I am by no means "experienced" in this arena. (I come from the days of the old cassette-based 4-track).
Anyway, after reading rave reviews of the FMR Audio RNP (Really Nice Preamp), I bought it. Having recorded acoustic guitar using a Rode NT1-A into the preamp, and then into input 1 on the MOTU, I've had good results.
Here is my question.....
When I record guitar (1978 Gibson ES-335 with factory coil-tap :D ) , is it better to go from the PREAMP into one of the LINE-INs on the MOTU interface, OR go from the PREAMP into one of the two MIC / INST inputs on the MOTU ?? Isn't that like using two preamps?? I don't use the 48v boost or pads on the MIC / INST input on the MOTU.
For an experiment, I tried going PREAMP > Line-In (Ch3) on the MOTU, loaded up one of the guitar channel strips in Logic, and recorded.
I found that by setting the preamp level to +18db on the RNP (can go from 6-66db of gain), setting the TRIM on the MOTU line input 3 to about 7, I was getting a decent signal. Prior to this, I'd have only 6db of gain on the preamp, the trim on MOTU line 1 set at about 4, and I'd have to use a noise gate quite heavily.
I'm not sure if it's my imagination or not, but it seemed to sound better going through the line-in input. That's my problem!!! I am not sure what the best method is.
The RNP has two channels with HI-Z 1/4 inputs in the front, and two standard XLR jacks in the rear for microphones, both channels also having a +48V button for phantom power for microphones. Additionally, the MOTU first two channels have a 48V toggle switch and pads.
Can anyone provide insight into my dilemma ?
Thanks! :)
Ok, so I have been using the MOTU Ultralite for a number of years now. I end up working on my music off and on, so I am by no means "experienced" in this arena. (I come from the days of the old cassette-based 4-track).
Anyway, after reading rave reviews of the FMR Audio RNP (Really Nice Preamp), I bought it. Having recorded acoustic guitar using a Rode NT1-A into the preamp, and then into input 1 on the MOTU, I've had good results.
Here is my question.....
When I record guitar (1978 Gibson ES-335 with factory coil-tap :D ) , is it better to go from the PREAMP into one of the LINE-INs on the MOTU interface, OR go from the PREAMP into one of the two MIC / INST inputs on the MOTU ?? Isn't that like using two preamps?? I don't use the 48v boost or pads on the MIC / INST input on the MOTU.
For an experiment, I tried going PREAMP > Line-In (Ch3) on the MOTU, loaded up one of the guitar channel strips in Logic, and recorded.
I found that by setting the preamp level to +18db on the RNP (can go from 6-66db of gain), setting the TRIM on the MOTU line input 3 to about 7, I was getting a decent signal. Prior to this, I'd have only 6db of gain on the preamp, the trim on MOTU line 1 set at about 4, and I'd have to use a noise gate quite heavily.
I'm not sure if it's my imagination or not, but it seemed to sound better going through the line-in input. That's my problem!!! I am not sure what the best method is.
The RNP has two channels with HI-Z 1/4 inputs in the front, and two standard XLR jacks in the rear for microphones, both channels also having a +48V button for phantom power for microphones. Additionally, the MOTU first two channels have a 48V toggle switch and pads.
Can anyone provide insight into my dilemma ?
Thanks! :)
liamkp
Jul 23, 10:40 PM
I am planning on getting a 4G upon release date, and was wanting FM radio. Any suggestions?
Reflow
Apr 22, 09:13 PM
Try one of the following to see if it works
Use one of the following methods to scan a document.
Method one: Scan from the Preview application
Click the Apple Preview icon in the dock, or open Preview from the Applications folder.From the Preview File pull-down menu, select Import from Scanner. Select your product from the list displayed. The scan interface opens.
3D glasses are out of stock
Wearing the 3D glasses will
Patrons wearing 3D glasses
The 3D glasses used in
printable paper 3d glasses
3D glasses/For LG 3D TV
The glasses you need for 3D
3D Glasses clear new Liberal
a pair of 3D glasses.
people online if they are
online using Glasses at
You need RED/BLUE 3D glasses
3d glasses review 2010
Use one of the following methods to scan a document.
Method one: Scan from the Preview application
Click the Apple Preview icon in the dock, or open Preview from the Applications folder.From the Preview File pull-down menu, select Import from Scanner. Select your product from the list displayed. The scan interface opens.
GekiRed
Jan 27, 08:46 AM
It was working perfectly fine jailbroken before the bad sync happened. I take it that it's safe to do a backup through ifunbox before doing a reset?
TSE
Feb 15, 11:27 AM
Hi guys...
So yeah. I have this old iMac G3 that has been sitting in my closet for years, it hasn't been used for over 5 years. So I turn it on yesterday after discovering all the old Mac games on Macintoshgarden, and it works! :D
The specs go as follows:
G3 333 mhz, 64 MB RAM, 6 GB HD, OS 9.2.2
If i buy two 128 MB sticks at OWC, will I be able to run any Mac game from 2001 and older just fine? The early early Mac OS X games built for 10.0-10.1 that are 3D but also compatible with OS 9 are the ones that scare me the most.
So yeah. I have this old iMac G3 that has been sitting in my closet for years, it hasn't been used for over 5 years. So I turn it on yesterday after discovering all the old Mac games on Macintoshgarden, and it works! :D
The specs go as follows:
G3 333 mhz, 64 MB RAM, 6 GB HD, OS 9.2.2
If i buy two 128 MB sticks at OWC, will I be able to run any Mac game from 2001 and older just fine? The early early Mac OS X games built for 10.0-10.1 that are 3D but also compatible with OS 9 are the ones that scare me the most.
nork
May 22, 11:53 AM
convert real audio to mp3 with the streambox ripper
download the streambox ripper at its new location at
http://www.streamboxripper.net/
download the streambox ripper at its new location at
http://www.streamboxripper.net/
Snowelevation
Mar 28, 12:29 PM
hey guys,
I was just wondering if there was anyone that knew a good way to pump out their itunes library to their phone or ipad? (via wifi or 3g)
is there an app i can use in order to receive signal from an open port on my router or what?
thanks for all the help!
:)
I was just wondering if there was anyone that knew a good way to pump out their itunes library to their phone or ipad? (via wifi or 3g)
is there an app i can use in order to receive signal from an open port on my router or what?
thanks for all the help!
:)
glocke12
Jan 27, 02:51 PM
I was wondering about that as my QR code reader can't read it.
if you clink on it, it will appear larger in a new window, should be easier to read.
if you clink on it, it will appear larger in a new window, should be easier to read.
Rowf
Apr 23, 11:08 AM
Umm, what's the Unix diff command?
beatle888
Oct 24, 11:29 PM
Thank you DJGuri.
rdowns
Nov 4, 03:04 PM
Just a heads up, this forum seems to prefer very colorful signatures and COmic Sans font. ;)
anjinha
Apr 17, 02:36 PM
Thats exactly why he's crying. :D
When my sister was a baby apparently she would cry between spoonfuls of soup. :D
When my sister was a baby apparently she would cry between spoonfuls of soup. :D
ColeHarris
Jun 20, 03:53 PM
Anybody going to the park meadows store in Lone Tree? I'll be there around 4:00 maybe earlier depending upon availability of the white iPhone. I'm thinking: bring iPad and lots of coffee!!!!!!!! Hope to see some of you guys there!
johneaston
May 4, 03:23 PM
Try buying TV series instead of illegally downloading them off the net. :rolleyes:
Your copyright infringement issues seem quite selective.
http://forums.macrumors.com/showthread.php?t=1078674&highlight=
Your copyright infringement issues seem quite selective.
http://forums.macrumors.com/showthread.php?t=1078674&highlight=
angelwatt
Feb 23, 07:06 PM
I remember finding that the legend tag is very hard to do extensive styling on, and get cross-browser compatibility. I ended up giving up on whatever fanciness that I had been trying. The browsers simply implemented the specifics of how styles effect the legend tag very differently. It's one case where I find it OK to go slightly off semantic HTML if you really want a specific look.
sheepopo39
Mar 25, 08:36 PM
I'm sorry if this has been asked before, but I wasn't sure what to search for. What do the numbers under a some Macrumors forums usernames mean? Its in place of "Macrumors Member" and says for example "Macrumors 68000".
knicksfan58
Oct 16, 08:54 PM
i am looking to upgrade from the jbl creature speakers that i have hooked up to my mac. so far i like the cambridge soundworks megaworks 211 computer speaker system. does anyone have any experience with these? is there a significant difference between them and the creatures? are there any other reccomendations?
arkitect
Jan 24, 07:41 AM
British engineers are planning to put a mobile phone in space.
Megatoerist
May 4, 02:43 PM
Mac OS X: Why your Mac might not sleep or stay in sleep mode (http://support.apple.com/kb/HT1776)
Been there, done that. :)
- Bluetooth switched off
- Nothing shared over the network
- No external keyboard and mouse present
- No USB/peripherals connected
- Spotlight isn't indexing
- Safe mode already tried
- I hear just the fans
- Energy saver preferences are normally set to default, but I have them both at 1 minute delay for now.
Thanks!
-Megatoerist
Been there, done that. :)
- Bluetooth switched off
- Nothing shared over the network
- No external keyboard and mouse present
- No USB/peripherals connected
- Spotlight isn't indexing
- Safe mode already tried
- I hear just the fans
- Energy saver preferences are normally set to default, but I have them both at 1 minute delay for now.
Thanks!
-Megatoerist
trjwv
Mar 11, 09:03 AM
I was wondering what works great for calibrating an iMac? I have used the i1 display 2 from x-rite and was wondering who has had good sucess with it. to me it seems to automatically adjust everything and you do not have to do anything manually. I still thing the screen brightness is too bright. Does it not change this setting? Also is the x-rite color munki better? I am using the 27" iMac and the epson 4900 pro stylus printer. I have found an internal color calibration tool in system preferences on the iMac. Anyone ever used this?
I am trying to get to WYSIWYG when printing from my iMac to my epson 4900 printer.
thanks...
I am trying to get to WYSIWYG when printing from my iMac to my epson 4900 printer.
thanks...
alan111
Mar 14, 09:08 PM
Ask one of your friends if you can borrow their snow leopard disc. Otherwise, just wait until Lion this summer. I have the beta, and it's a pretty nice upgrade.
Inscription à :
Publier les commentaires (Atom)
Aucun commentaire:
Enregistrer un commentaire